GeoMotions, LLC


· Home
· About_Us
· Contact_Us
· Downloads
· FAQ
· Order Programs
· Short_Courses
· Software
· Training
· Web Links

GeoMotions Suite - Update




September 2017 Update - Release 9.99.9930: This update works only for version 9.99.7 or greater. If your version is older, i.e., 9.99.6 or lower, please download and install the full version as explained in the Full Version section. To find out what version you have, click on the "About" command button of the Main Menu form.


Click here to download the installation instructions.


Users of Stand-Alone USB Hardware Key

Update 9.99.9930 - Stand-alone Version: To install this update, download the Update.exe file using the following link, execute the file and then follow the instructions.

Click here to download Update.exe file (size: 57,868,638 bytes)


Full Stand-Alone Version Installation - Option 1: 1) download the zip file below to a temporary folder (check that the size of the downloaded file is as shown below); 2) uninstall the current version from your computer; 3) extract the contents of the zip file; and, 4) execute the setup.exe file to install the programs:

Click here to download GeoMotions.zip file (size: 519,284,460 bytes)


If you have problems downloading large files, try downloading the following eight files instead. To install the program, execute the GeoMotions.exe file.

Click here to download GeoMotions.exe file (size: 65,535,889 bytes)

Click here to download GeoMotions2.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions3.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions4.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions5.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions6.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions7.exe file (size: 65,536,000 bytes)

Click here to download GeoMotions8.exe file (size: 64,909,095 bytes)





Users of Network USB Hardware Key

Update 9.99.9930 - Network Version: To install this update, download the Update.exe file using the following link, execute the file and then follow the instructions.

Click here to download UpdateNTW.exe file (size: 57,868,653 bytes)


Full Network Version Installation: 1) download the zip file below to a temporary folder (check that the size of the downloaded file is as shown below); 2) uninstall the current version from your computer; 3) extract the contents of the zip file; and, 4) execute the setup.exe file to install the programs:

Click here to download GeoMotionsNTW.zip file (size: 519,283,497 bytes)


Network Version - Server Installation: 1) download the zip file below to a temporary folder (check that the size of the downloaded file is as shown below); 2) extract the contents of the zip file; and, 3) execute the SentinelProtectionInstaller.exe file and follow the instructions.

Click here to download GeoMotions_Server.zip file (size: 14,882,340 bytes)





USB Hardware Key Not Found - Re-Install USB Hardware Key Drivers

Windows 7/8/10 & SafeNet/Gemalto Black USB Key: Some users have reported that after the installation, Windows 7/8/10 may report that the drivers for the USB key are not installed or the GeoMotions USB Key cannot be found. To fix this problem: 1) in the folder where the programs were installed, there is a Utilities folder and in this a SafeNet folder; 2) in this last folder, execute the Safenet System Driver Installer #.#.#.exe file to re-install the drivers; and, 3) reboot your computer. You can also download the latest drivers using the following link:

Click here to download SafeNet/Gemalto drivers

Matrix Blue USB Key: Some users have reported that after the installation, Windows may report that the drivers for the USB key are not installed or the GeoMotions programs can't find the key. To fix this problem: 1) download the following program that will install the drivers of the key before the program is installed, please use the same folder where the GeoMotions Suite will be installed (e.g., create the GeoMotions folder):

Click here to download Matrix drivers

2) Extract the contents of the file to the GeoMotions folder created in 1 above and verify that a Matrix folder was created; 3) in this folder, execute the inf_inst.exe file; and, 4) install the GeoMotions Suite









Copyright © by GeoMotions, LLC All Right Reserved.

Published on: 2009-12-13 (14236 reads)

[ Go Back ]


Copyright by GeoMotions, LLC All Right Reserved.